/*
  debug.h - Debug functions.
  Created by João Lino, September 25, 2015.
  Released into the public domain.
*/

#ifndef CONFIG_h
#define CONFIG_h

// ######################### SETTINGS #########################
#define SETTING_CLEANING_TIME					      1200 //1200
#define SETTING_CLEANING_TEMPERATURE			  45 //45
#define SETTING_MACHINE_YIELD_CAPACITY_MIN  0
#define SETTING_MACHINE_YIELD_CAPACITY_MAX  50
#define SETTING_MACHINE_YIELD_DEFAULT       40
#define SETTING_MACHINE_LOGGING_INTERVAL    1000
#define SETTING_WARNING_BEEP_INTERVAL       5000

// ++++++++++++++++++++++++ Heating Element Relay ++++++++++++++++++++++++
#define HEATING_ELEMENT_OUTPUT_PIN                24
//#define HEATING_ELEMENT_DEFAULT_WINDOW_SIZE       1000
//#define HEATING_ELEMENT_MAX_HEAT_PWM_INTEGER      5
//#define HEATING_ELEMENT_MAX_HEAT_PWM_FLOAT        5.0
//#define HEATING_ELEMENT_MAX_WATTAGE               3000.0          // Minimum = 2000.0
//#define HEATING_ELEMENT_AC_FREQUENCY_HZ           50.0

// ++++++++++++++++++++++++ Temperature ++++++++++++++++++++++++
#define TEMPERATURE_MIN_VALUE                     0
#define TEMPERATURE_MAX_VALUE                     120
#define PT100_BASE_INPUT_PIN                      A4
#define PT100_BASE_OUTPUT_PIN                     32
#define PT100_BASE_TIME_BETWEEN_READINGS          1
#define PT100_UP_INPUT_PIN                        A5
#define PT100_UP_OUTPUT_PIN                       30
#define PT100_UP_TIME_BETWEEN_READINGS            1
#define PT100_DOWN_INPUT_PIN                      A6
#define PT100_DOWN_OUTPUT_PIN                     31
#define PT100_DOWN_TIME_BETWEEN_READINGS          1

// ++++++++++++++++++++++++ Mixer ++++++++++++++++++++++++
//#define MIXER_PIN     12
//#define MIXER_MAX_POSITION   255

// ++++++++++++++++++++++++ Pump ++++++++++++++++++++++++
#define PIEZO_PIN                                 25

// ++++++++++++++++++++++++ Pump ++++++++++++++++++++++++
#define PUMP_PIN                                  6
#define PUMP_TEMPERATURE_MAX_OPERATION            90
#define PUMP_PRIMING_TIME_IN_SECONDS              10
#define PUMP_SPEED_STOP_MOSFET                    255
#define PUMP_SPEED_MAX_MOSFET                     0
#define PUMP_SPEED_DEFAULT                        PUMP_SPEED_MAX_MOSFET

// ++++++++++++++++++++++++ Rotary Encoder ++++++++++++++++++++++++
#define ROTARY_ENCODER_INTERRUPT_NUMBER           1    // On Mega2560 boards, interrupt 1 is on pin 3
#define ROTARY_ENCODER_CLK_PIN                    3    // Used for generating interrupts using CLK signal
#define ROTARY_ENCODER_DT_PIN                     22    // Used for reading DT signal
#define ROTARY_ENCODER_SW_PIN                     23    // Used for the push button switch
#define ROTARY_ENCODER_DEBOUNCE_TIME              50 //20    // Number of miliseconds to ignore new signals a signal is received
#define ROTARY_ENCODER_SW_DEBOUNCE_TIME           10 //20    // Number of miliseconds to ignore new signals a signal is received

// ++++++++++++++++++++++++ State Machine ++++++++++++++++++++++++
#define SETTING_WELCOME_TIMEOUT                   100
#define SETTING_MAX_INACTIVITY_TIME               3000
#define SETTING_CANCEL_TIMER                      1000
#define MENU_INIT                                 eMenuType_Main
#define MENU_SIZE_MAIN_MENU                       13
#define MENU_SIZE_PROFILES_MENU                   9
#define MENU_SIZE_STAGE_MENU                      13
#define MENU_SIZE_MALT_MENU                    	  4
#define MENU_SIZE_SETTINGS_MENU                   6
#define SETTING_COOKING_STAGE_INIT                eCookingStage_Startpoint
#define SETTING_BEER_PROFILE_INIT                 eBeerProfile_Trigo

// ++++++++++++++++++++++++ Menus ++++++++++++++++++++++++
#define MENU_MAIN_TITLE                           "Brewery Menu"
#define MENU_MAIN_DIALOG                          { "", "-> GO           ", "-> GO from stage", "-> STOP         ", "-> SKIP         ", "-> BeerProfile  ", "-> Stages       ", "-> Malt         ", "-> Hops         ", "-> Clean        ", "-> Purge        ", "-> Settings     ", "-> Back         " }
#define MENU_MAIN_INIT_POSITION                   eMainMenu_GO
#define MENU_MAIN_INIT_SELECTION                  eMainMenu_NULL
#define MENU_MAIN_INIT_REPAINT                    false
#define MENU_MAIN_FUNCTION                        &runMainMenuSelection

#define MENU_PROFILE_TITLE                        "Profile Menu"
#define MENU_PROFILE_DIALOG                       {"", "-> Basic        ", "-> Trigo        ", "-> IPA          ", "-> Belga        ", "-> Red          ", "-> APA          ", "-> Custom       ", "-> Back         " }
#define MENU_PROFILE_INIT_POSITION                eBeerProfileMenu_Basic
#define MENU_PROFILE_INIT_SELECTION               eBeerProfileMenu_NULL
#define MENU_PROFILE_INIT_REPAINT                 false
#define MENU_PROFILE_FUNCTION                     &runBeerProfileSelection

#define MENU_STAGE_TITLE                          "Stage Menu"
#define MENU_STAGE_DIALOG                         {"", "-> Startpoint   ", "-> BetaGlucanase", "-> Debranching  ", "-> Proteolytic  ", "-> Beta Amylase ", "-> Alpha Amylase", "-> Mashout      ", "-> Recirculation", "-> Sparge       ", "-> Boil         ", "-> Cooling      ", "-> Back         " }
#define MENU_STAGE_INIT_POSITION                  eStageMenu_Startpoint
#define MENU_STAGE_INIT_SELECTION                 eStageMenu_NULL
#define MENU_STAGE_INIT_REPAINT                   false
#define MENU_STAGE_FUNCTION                       &runStageSelection

#define MENU_MALT_TITLE                           "Malt Menu"
#define MENU_MALT_DIALOG                          {"", "-> CM Ch. Pilsen", "-> CM Wheat Blan", "-> Back         " }
#define MENU_MALT_INIT_POSITION                   eMaltMenu_CastleMalting_Chteau_Pilsen_2RS
#define MENU_MALT_INIT_SELECTION                  eMaltMenu_NULL
#define MENU_MALT_INIT_REPAINT                    false
#define MENU_MALT_FUNCTION                        &runMaltSelection

#define MENU_SETTINGS_TITLE                       "Settings Menu"
#define MENU_SETTINGS_DIALOG                      {"", "-> PT100 Element", "-> PT100 Up     ", "-> PT100 Down   ", "-> Back         " }
#define MENU_SETTINGS_INIT_POSITION               eSettingsMenu_PT100_Element
#define MENU_SETTINGS_INIT_SELECTION              eSettingsMenu_NULL
#define MENU_SETTINGS_INIT_REPAINT                false
#define MENU_SETTINGS_FUNCTION                    &runSettingsSelection

#define MENU_GLOBAL_STR_TEMPERATURE               "temperature"
#define MENU_GLOBAL_STR_CELSIUS                   "*C"

#define MENU_START_TITLE                          MENU_STAGE_TITLE
#define MENU_START_DIALOG                         MENU_STAGE_DIALOG
#define MENU_START_INIT_POSITION                  MENU_STAGE_INIT_POSITION
#define MENU_START_INIT_SELECTION                 MENU_STAGE_INIT_SELECTION
#define MENU_START_INIT_REPAINT                   MENU_STAGE_INIT_REPAINT
#define MENU_START_FUNCTION                       &runStartFromStageSelection

// ++++++++++++++++++++++++ Serial Monotor ++++++++++++++++++++++++
#define SETTING_SERIAL_MONITOR_BAUD_RATE          115200
//#define SETTING_SERIAL_MONITOR_BAUD_RATE          9600
#define SETTING_SERIAL_MONITOR_WELCOME_MESSAGE    "Let's start Brewing!"

// ######################### LIBRARIES #########################
// ++++++++++++++++++++++++ LiquidCrystal_I2C ++++++++++++++++++++++++
#define LCD_I2C_ADDR                              0x27    // <<----- Add your address here.  Find it from I2C Scanner
#define LCD_HORIZONTAL_RESOLUTION                 16
#define LCD_VERTICAL_RESOLUTION                   2
#define LCD_BACKLIGHT_PIN                         3
#define LCD_EN_PIN                                2
#define LCD_RW_PIN                                1
#define LCD_RS_PIN                                0
#define LCD_D4_PIN                                4
#define LCD_D5_PIN                                5
#define LCD_D6_PIN                                6
#define LCD_D7_PIN                                7

#endif