Skip to content

B
brew
Commit 919194c6 authored by service-config's avatar service-config
Browse files
Options

a lot has happened, stay tuned.

parent 3d892377
Hide whitespace changes
Inline Side-by-side
Showing with 1039 additions and 0 deletions
brew.ino 0 → 100644
View file @ 919194c6
// ######################### DECLARE #########################
// ++++++++++++++++++++++++ ERROR ++++++++++++++++++++++++
//#include "error.h"
// ++++++++++++++++++++++++ ERROR ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Library - DHT ++++++++++++++++++++++++
//#include "DHT.h" //DHT humidity/temperature sensors
//#define DHTPIN 2 // What pin we're connected to
//#define DHTTYPE DHT11 // DHT 11
#define ponto1 A4//
#define ponto2 A5//
#define R1 462.0
#define R2 460.0
#define R3 460.0
#define calibragem 3.8515352672
float amostra1;//
float amostra2;//
float diferenca;
float temperatura, temperatura1;//
float tabela[] = {100.00, 100.39, 100.78, 101.17, 101.56, 101.95, 102.34, 102.73, 103.12, 103.51, 103.90, 104.29, 104.68, 105.07, 105.46, 105.85, 106.24, 106.63, 107.02, 107.40, 107.79, 108.18, 108.57, 108.96, 109.35, 109.73, 110.12, 110.51, 110.90, 111.29, 111.67, 112.06, 112.45, 112.83, 113.22, 113.61, 114.00, 114.38, 114.77, 115.15, 115.54, 115.93, 116.31, 116.70, 117.08, 117.47, 117.86, 118.24, 118.63, 119.01, 119.40, 119.78, 120.17, 120.55, 120.94, 121.32, 121.71, 122.09, 122.47, 122.86, 123.24, 123.63, 124.01, 124.39, 124.78, 125.16, 125.54, 125.93, 126.31, 126.69, 127.08, 127.46, 127.84, 128.22, 128.61, 128.99, 129.37, 129.75, 130.13, 130.52, 130.90, 131.28, 131.66, 132.04, 132.42, 132.80, 133.18, 133.57, 133.95, 134.33, 134.71, 135.09, 135.47, 135.85, 136.23, 136.61, 136.99, 137.37, 137.75, 138.13, 138.51, 138.88, 139.26, 139.64, 140.02, 140.40, 140.78, 141.16, 141.54, 141.91, 142.29, 142.67, 143.05, 143.43, 143.80, 144.18, 144.56, 144.94, 145.31, 145.69, 146.07, 146.44, 146.82, 147.20, 147.57, 147.95, 148.33, 148.70, 149.08, 149.46, 149.83, 150.21, 150.58, 150.96, 151.33, 151.71, 152.08, 152.46, 152.83, 153.21, 153.58, 153.96, 154.33, 154.71, 155.08, 155.46, 155.83, 156.20, 156.58, 156.95, 157.33, 157.70, 158.07, 158.45, 158.82, 159.19, 159.56, 159.94, 160.31, 160.68, 150.00, 160.00, 161.05, 161.43, 161.80, 162.17, 162.54, 162.91, 163.29, 163.66, 164.03, 164.40, 164.77, 165.14, 165.51, 165.89, 166.26, 166.63, 167.00, 167.37, 167.74, 168.11, 168.48, 168.85, 169.22, 169.59, 169.96, 170.33, 170.70, 171.07, 171.43, 171.80, 172.17, 172.54, 172.91, 173.28, 173.65, 174.02, 174.38, 174.75, 175.12, 175.49, 175.86, 176.22, 176.59, 176.96, 177.33, 177.69, 178.06, 178.43, 178.79, 179.16};
float tensaoPorAmostra;
float Vg;
float Vs;
float a;
float Rx;
// ++++++++++++++++++++++++ Library - DHT ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Library - LiquidCrystal_I2C ++++++++++++++++++++++++
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
#define LCD_I2C_ADDR 0x27 // <<----- Add your address here. Find it from I2C Scanner
#define LCD_X 16
#define LCD_Y 2
#define BACKLIGHT_PIN 3
#define En_pin 2
#define Rw_pin 1
#define Rs_pin 0
#define D4_pin 4
#define D5_pin 5
#define D6_pin 6
#define D7_pin 7
// ++++++++++++++++++++++++ Library - LiquidCrystal_I2C ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Heating Element Relay ++++++++++++++++++++++++
#include <PID_v1.h>
#define HEATING_ELEMENT 24
// ++++++++++++++++++++++++ Heating Element Relay ++++++++++++++++++++++++
// ++++++++++++++++++++++++ State Machine ++++++++++++++++++++++++
#define SETTING_WELCOME_TIMEOUT 2000
#define MENU_MAX_DEPTH 10
#define MENU_INIT_VALUES -1,-1,-1,-1,-1,-1,-1,-1,-1,-1
// ++++++++++++++++++++++++ State Machine ++++++++++++++++++++++++
// ######################### DECLARE #########################
// ######################### INITIALIZE #########################
// ++++++++++++++++++++++++ Library - DHT ++++++++++++++++++++++++
//DHT dht(DHTPIN, DHTTYPE);
// ++++++++++++++++++++++++ Library - DHT ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Library - LiquidCrystal_I2C ++++++++++++++++++++++++
int n = 1;
LiquidCrystal_I2C lcd(LCD_I2C_ADDR,En_pin,Rw_pin,Rs_pin,D4_pin,D5_pin,D6_pin,D7_pin);
// ++++++++++++++++++++++++ Library - LiquidCrystal_I2C ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Rotary Encoder ++++++++++++++++++++++++
volatile int virtualPosition = 0;
volatile int maxPosition = 120;
volatile int menuSize = 2;
const int PinCLK = 3; // Used for generating interrupts using CLK signal
const int PinDT = 22; // Used for reading DT signal
const int PinSW = 23; // Used for the push button switch
// ++++++++++++++++++++++++ Rotary Encoder ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Heating Element Relay ++++++++++++++++++++++++
//Define Variables we'll be connecting to
double Setpoint, Input, Output;
//Specify the links and initial tuning parameters
float Kp = 200;
float Ki = 50;
float Kd = 0;
PID myPID(&Input, &Output, &Setpoint,Kp,Ki,Kd, DIRECT);
//PID myPID(&Input, &Output, &Setpoint,1000,50,0, DIRECT);
int WindowSize = 5000;
unsigned long windowStartTime;
// ++++++++++++++++++++++++ Heating Element Relay ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Error ++++++++++++++++++++++++
enum sys_error {
no_error,
catastrofic_failure_sensor_temperature,
catastrofic_failure_program,
catastrofic_failure_logic_auto_manual
};
sys_error error = no_error;
// ++++++++++++++++++++++++ Error ++++++++++++++++++++++++
// ++++++++++++++++++++++++ State Machine ++++++++++++++++++++++++
// global
enum state_machine {
state_welcome,
state_menu,
state_manual_time,
state_manual_temperature,
state_manual_mode,
state_error
};
state_machine state = state_welcome;
// menu
enum main_menu_list {
main_manual,
main_auto
};
enum manual_menu_list {
manual_temperature,
manual_time,
manual_mode,
manual_start,
manual_back
};
enum auto_menu_list {
auto_recipe,
auto_start,
auto_back
};
int menu_position[MENU_MAX_DEPTH]= {MENU_INIT_VALUES};
// cooking
//int cookTime = 600;
//int cookTemperature = 100;
int cookTime = 3600;
int cookTemperature = 70;
enum cook_mode_list {
quick_start,
start_at_temperature
};
cook_mode_list cookMode = quick_start;
// ++++++++++++++++++++++++ State Machine ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Global Variables ++++++++++++++++++++++++
//float currentTemperatureCelsius;
//float targetTemperatureCelsius = -1;
// ++++++++++++++++++++++++ Global Variables ++++++++++++++++++++++++
// ######################### INITIALIZE #########################
// ######################### INTERRUPTS #########################
static unsigned long lastInterruptTime = 0;
void isr () { // Interrupt service routine is executed when a HIGH to LOW transition is detected on CLK
unsigned long interruptTime = millis();
// If interrupts come faster than 5ms, assume it's a bounce and ignore
if ((interruptTime - lastInterruptTime) > 5) {
switch(state) {
case state_manual_mode:
case state_menu: {
if (!digitalRead(PinDT)) {
virtualPosition = (virtualPosition + 1);
}
else {
virtualPosition = virtualPosition - 1;
}
if (virtualPosition >= menuSize) {
virtualPosition = 0;
}
if (virtualPosition < 0) {
virtualPosition = menuSize -1;
}
break;
}
case state_manual_time: {
if (!digitalRead(PinDT)) {
if(virtualPosition >= 60) {
virtualPosition = (virtualPosition + 30);
}
else {
virtualPosition = (virtualPosition + 1);
}
}
else {
if(virtualPosition == 0) {
virtualPosition = (virtualPosition + 60);
}
else {
if(virtualPosition >= 90) {
virtualPosition = (virtualPosition - 30);
}
else {
virtualPosition = virtualPosition - 1;
}
}
}
if (virtualPosition > 7200) {
virtualPosition = 7200;
}
if (virtualPosition < 0) {
virtualPosition = 0;
}
break;
}
case state_manual_temperature: {
if (!digitalRead(PinDT)) {
if ((interruptTime - lastInterruptTime) < 10) {
virtualPosition = (virtualPosition + 5);
}
else {
virtualPosition = (virtualPosition + 1);
}
}
else {
if ((interruptTime - lastInterruptTime) < 10) {
virtualPosition = (virtualPosition - 5);
}
else {
virtualPosition = (virtualPosition - 1);
}
}
if (virtualPosition > maxPosition) {
virtualPosition = maxPosition;
}
if (virtualPosition < 0) {
virtualPosition = 0;
}
break;
}
default: {
}
}
}
lastInterruptTime = interruptTime;
}
// ######################### INTERRUPTS #########################
// ######################### START #########################
void setup() {
// ++++++++++++++++++++++++ Library - DHT ++++++++++++++++++++++++
//dht.begin();
// ++++++++++++++++++++++++ Library - DHT ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Library - LiquidCrystal_I2C ++++++++++++++++++++++++
lcd.begin (LCD_X,LCD_Y); // <<----- My LCD was 16x2
// Switch on the backlight
lcd.setBacklightPin(BACKLIGHT_PIN,POSITIVE);
lcd.setBacklight(HIGH);
// ++++++++++++++++++++++++ Library - LiquidCrystal_I2C ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Rotary Encoder ++++++++++++++++++++++++
pinMode(PinCLK,INPUT);
pinMode(PinDT, INPUT);
pinMode(PinSW, INPUT);
attachInterrupt(1, isr, FALLING); // interrupt 0 is always connected to pin 2 on Arduino UNO
// ++++++++++++++++++++++++ Rotary Encoder ++++++++++++++++++++++++
// ++++++++++++++++++++++++ Heating Element Relay ++++++++++++++++++++++++
pinMode(HEATING_ELEMENT, OUTPUT);
digitalWrite(HEATING_ELEMENT,LOW);
windowStartTime = millis();
//initialize the variables we're linked to
Setpoint = 100;
//tell the PID to range between 0 and the full window size
myPID.SetOutputLimits(0, WindowSize);
//turn the PID on
myPID.SetMode(AUTOMATIC);
// ++++++++++++++++++++++++ Heating Element Relay ++++++++++++++++++++++++
Serial.begin(9600);
Serial.println("Let's start Brewing!");
}
// ######################### START #########################
void loop() {
switch(state) {
case state_welcome: {
runWelcome();
break;
}
case state_menu: {
runMenu();
break;
}
case state_manual_time: {
//runManualTime();
break;
}
case state_manual_temperature: {
//runManualTemp();
break;
}
case state_error: {
runError();
break;
}
default: {
lcdPrint("Error", "The brewer has stoped working properly. Please shutdown NOW for your safety!");
state = state_error;
error = catastrofic_failure_program;
}
}
}
void runWelcome() {
// Write welcome
lcd.clear();
lcd.home (); // go home
lcd.print(" Let's start");
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print(" Brewing!");
delay(SETTING_WELCOME_TIMEOUT);
//state = state_manual_temp;
//state = state_manual_time;
state = state_menu;
}
void runMenu() {
digitalWrite(HEATING_ELEMENT,LOW);
switch(menu_position[0]) {
case main_manual: {
switch(menu_position[1]) {
case manual_temperature: {
// do work
cookTemperature = getTemperature(cookTemperature);
menu_position[1] = -1;
virtualPosition = manual_temperature;
break;
}
case manual_time: {
// do work
cookTime = getTimer(cookTime);
menu_position[1] = -1;
virtualPosition = manual_time;
break;
}
case manual_mode: {
// do work
int returnMode = getMode();
switch(returnMode) {
case quick_start: {
cookMode = quick_start;
break;
}
case start_at_temperature: {
cookMode = start_at_temperature;
break;
}
default: {
cookMode = quick_start;
}
}
menu_position[1] = -1;
virtualPosition = manual_mode;
break;
}
case manual_start: {
// do work
runStart();
menu_position[1] = -1;
virtualPosition = manual_start;
break;
}
case manual_back: {
menu_position[0] = -1;
menu_position[1] = -1;
virtualPosition = manual_back;
break;
}
default: {
// reset menu variables
//virtualPosition = 0;
menuSize = 5;
// display menu
lcd.clear();
lcd.home (); // go home
lcd.print("Manual Menu");
while(true) {
switch(virtualPosition) {
case manual_temperature: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Temperature ");
delay(100);
break;
}
case manual_time: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Time ");
delay(100);
break;
}
case manual_mode: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Mode ");
delay(100);
break;
}
case manual_start: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Start ");
delay(100);
break;
}
case manual_back: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Back ");
delay(100);
break;
}
default: {
//lcd.setCursor (0,1); // go to start of 2nd line
//lcd.print("*** Error ***");
virtualPosition = 0;
}
}
if (!(digitalRead(PinSW))) { // check if pushbutton is pressed
menu_position[1] = virtualPosition;
while (!digitalRead(PinSW)) {} // wait til switch is released
delay(10); // debounce
break;
}
}
}
}
break;
}
case main_auto: {
switch(menu_position[1]) {
case auto_recipe: {
// do work
menu_position[1] = -1;
virtualPosition = auto_recipe;
break;
}
case auto_start: {
// do work
menu_position[1] = -1;
virtualPosition = auto_start;
break;
}
case auto_back: {
// reset choces
menu_position[0] = -1;
menu_position[1] = -1;
// set menu position
virtualPosition = main_auto;
break;
}
default: {
// reset menu variables
//virtualPosition = 0;
menuSize = 3;
// display menu
lcd.clear();
lcd.home (); // go home
lcd.print("Automatic Menu");
while(true) {
switch(virtualPosition) {
case auto_recipe: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Recipe ");
delay(100);
break;
}
case auto_start: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Start ");
delay(100);
break;
}
case auto_back: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Back ");
delay(100);
break;
}
default: {
//lcd.setCursor (0,1); // go to start of 2nd line
//lcd.print("*** Error ***");
virtualPosition = 0;
}
}
if (!(digitalRead(PinSW))) { // check if pushbutton is pressed
menu_position[1] = virtualPosition;
while (!digitalRead(PinSW)) {} // wait til switch is released
delay(10); // debounce
break;
}
}
}
}
break;
}
default: {
// reset menu variables
//virtualPosition = 0;
menuSize = 2;
// display menu
lcd.clear();
lcd.home (); // go home
lcd.print("Main Menu");
while(true) {
switch(virtualPosition) {
case main_manual: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Manual ");
delay(100);
break;
}
case main_auto: {
lcd.setCursor (0,1); // go to start of 2nd line
lcd.print("-> Automatic ");
delay(100);
break;
}
default: {
//lcd.setCursor (0,1); // go to start of 2nd line
//lcd.print("*** Error ***");
virtualPosition = 0;
}
}
if (!(digitalRead(PinSW))) { // check if pushbutton is pressed
menu_position[0] = virtualPosition;
while (!digitalRead(PinSW)) {} // wait til switch is released
delay(10); // debounce
break;
}
}
}
}
}
int getTimer(int init) {
state_machine initialState = state;
// set operation state
state = state_manual_time;
virtualPosition = init;
// initialize variables
int lastCount = 0;
int minutes = 0;
int seconds = 0;
// Setup Screen
lcd.clear();
lcd.home();
lcd.print("Set Time");
lcd.setCursor (0,LCD_Y-1);
lcd.print(" 0:00");
while(true) {
// Check for timer set
if (!(digitalRead(PinSW))) { // check if pushbutton is pressed
while (!digitalRead(PinSW)) {} // wait til switch is released
delay(10); // debounce
break;
}
// display current timer
if (virtualPosition != lastCount) {
lastCount = virtualPosition;
minutes = virtualPosition/60;
seconds = virtualPosition-minutes*60;
lcd.setCursor (0,LCD_Y-1);
lcd.print(" ");
lcd.print(minutes);
lcd.print(":");
if(seconds<10) {
lcd.print("0");
}
lcd.print(seconds);
lcd.println(" ");
}
}
state = initialState;
return virtualPosition;
}
int getTemperature(int init) {
state_machine initialState = state;
// set operation state
state = state_manual_temperature;
virtualPosition = init;
// initialize variables
int lastCount = 0;
// Setup Screen
lcd.clear();
lcd.home();
lcd.print("Set Temperature");
lcd.setCursor (0,LCD_Y-1);
lcd.print(" 0 *C");
while(true) {
// Check for timer set
if (!(digitalRead(PinSW))) { // check if pushbutton is pressed
while (!digitalRead(PinSW)) {} // wait til switch is released
delay(10); // debounce
break;
}
// display current timer
if (virtualPosition != lastCount) {
lastCount = virtualPosition;
lcd.setCursor (0,LCD_Y-1);
lcd.print(" ");
if(virtualPosition<10) {
lcd.print(" ");
}
else {
if(virtualPosition<100) {
lcd.print(" ");
}
}
lcd.print(virtualPosition);
lcd.print(" *C");
lcd.println(" ");
}
}
state = initialState;
return virtualPosition;
}
int getMode() {
state_machine initialState = state;
int initialMenuSize = menuSize;
// set operation state
state = state_manual_mode;
menuSize = 2;
virtualPosition = cookMode;
// initialize variables
int lastCount = 0;
// Setup Screen
lcd.clear();
lcd.home();
lcd.print("Set Mode");
lcd.setCursor (0,LCD_Y-1);
lcd.print(" Quick Start");
while(true) {
// Check for timer set
if (!(digitalRead(PinSW))) { // check if pushbutton is pressed
while (!digitalRead(PinSW)) {} // wait til switch is released
delay(10); // debounce
break;
}
// display current timer
if (virtualPosition != lastCount) {
lastCount = virtualPosition;
lcd.setCursor (0,LCD_Y-1);
switch(virtualPosition) {
case quick_start: {
lcd.print(" Quick Start ");
break;
}
case start_at_temperature: {
lcd.print("Start After Temp");
break;
}
default: {
lcd.print("*** error ***");
}
}
lcd.println(" ");
}
}
state = initialState;
menuSize = initialMenuSize;
return virtualPosition;
}
void runStart() {
// Configure environment
long runCurrentTemperature;
long runTargetTemperature;
unsigned long runStartTime;
unsigned long runTargetTime;
cook_mode_list runCurrentMode;
boolean clockStart = false;
boolean clockEnd = false;
while(true) {
// Build Instructions
switch(menu_position[0]) {
case main_manual: {
// everything is set, lets run!
runTargetTemperature = cookTemperature;
runTargetTime = cookTime;
runCurrentMode = cookMode;
if(clockStart && clockEnd) {
delay(1000);
return;
}
break;
}
case main_auto: {
// set the next instruction
break;
}
default: {
lcdPrint("Error", "The system has failed to be set into manual or automatic mode!");
state = state_error;
error = catastrofic_failure_logic_auto_manual;
return;
}
}
// Run Instructions
// Setup LCD
lcd.clear();
lcd.home();
lcd.print("Hot: 000*C/000*C");
//lcd.print("Cool:000*C/000*C");
lcd.setCursor (0,LCD_Y-1);
if(runCurrentMode == quick_start) {
lcd.print("Quick 00:00");
clockStart = true;
runStartTime = millis();
}
else {
lcd.print("Wait 00:00");
}
//int lastCount = 0;
while(true) {
//Serial.println("From second while");
// Wait a few seconds between measurements.
//delay(100);
/* Read temperature from sensor
runCurrentTemperature = dht.readTemperature(); // Reading temperature
if (isnan(runCurrentTemperature)) { // Check if any reads failed and exit early (to try again).
// Got an error
state = state_error;
error = catastrofic_failure_sensor_temperature;
return;
}
*/
amostra1= analogRead(ponto1);
amostra2= analogRead(ponto2);
Serial.print("O valor das entradas sao: [");
Serial.print(amostra1);
Serial.print(", ");
Serial.print(amostra2);
Serial.println("]");
diferenca = amostra2 - amostra1;
Serial.print("diferenca: [");
Serial.print(diferenca, 6);
tensaoPorAmostra = 5.0 / 1024.0;
Serial.print("] tensao por amortra: [");
Serial.print(tensaoPorAmostra, 6);
Vg = ( diferenca ) * tensaoPorAmostra;
Serial.print("] Vg: [");
Serial.print(Vg, 6);
Vs = 5.0;
Serial.print("] Vs: [");
Serial.print(Vs);
a = R2 / (R1 + R2) - Vg / Vs;
Serial.print("] a: [");
Serial.print(a, 6);
Rx = (a * R3) / (1 - a);
Serial.print("] Rx: [");
Serial.print(Rx, 6);
Rx = Rx - calibragem;
int i;
int tabelaSize = sizeof(tabela) / sizeof(float);
for( i = 0; i <= tabelaSize; i++) {
if((tabela[i]) > Rx) {
if(i == 0) {
runCurrentTemperature = -1.0;
}
else {
if(i == tabelaSize) {
runCurrentTemperature = 210.0;
}
else {
runCurrentTemperature = (i - 1) + ((Rx - tabela[i-1])/(tabela[i] - tabela[i-1]));
//temperatura = map(Rx, tabela[i-1], tabela[i], i-1, i);
}
}
break;
}
}
/* Initialize target temperature with current temperature
if(runTargetTemperature<0) {
runTargetTemperature = runCurrentTemperature;
virtualPosition = runCurrentTemperature;
}*/
/* Read push button from the rotary encoder
if (!(digitalRead(PinSW))) { // check if pushbutton is pressed
virtualPosition = currentTemperatureCelsius; // if YES, then reset counter to ZERO
while (!digitalRead(PinSW)) {} // wait til switch is released
delay(10); // debounce
Serial.println("Reset"); // Using the word RESET instead of COUNT here to find out a buggy encoder
}*/
/* Read target temperature from the rotary encoder
if (virtualPosition != lastCount) {
lastCount = virtualPosition;
runTargetTemperature = virtualPosition;
Serial.print("Count: ");
Serial.println(virtualPosition);
}*/
// Operate the heating element
Input = runCurrentTemperature;
Setpoint = runTargetTemperature;
myPID.Compute();
/************************************************
* turn the output pin on/off based on pid output
************************************************/
unsigned long now = millis();
if(now - windowStartTime>WindowSize)
{ //time to shift the Relay Window
windowStartTime += WindowSize;
}
if(Output > now - windowStartTime) {
digitalWrite(HEATING_ELEMENT,HIGH);
if(Output != 0) {
/*
Serial.print("+++ Diff: ");
Serial.print(now - windowStartTime);
Serial.print(" | Output: ");
Serial.println(Output);
*/
}
}
else {
digitalWrite(HEATING_ELEMENT,LOW);
if(Output != 0) {
/*
Serial.print("--- Diff: ");
Serial.print(now - windowStartTime);
Serial.print(" | Output: ");
Serial.println(Output);
*/
}
}
// Print status to serial connection
//Serial.print("[Temperature Sensor] ");
//Serial.print("Temperature: ");
//Serial.print(runCurrentTemperature);
//Serial.print("*C | ");
//Serial.print(runTargetTemperature);
//Serial.println("*C ");
if(runCurrentMode == start_at_temperature) {
}
// Print status to LCD
lcd.setCursor (5,0);
if (runCurrentTemperature < 10) {
lcd.print(" ");
}
else {
if (runCurrentTemperature < 100) {
lcd.print(" ");
}
}
lcd.print(runCurrentTemperature);
lcd.setCursor (11,0);
if (runTargetTemperature < 10) {
lcd.print(" ");
}
else {
if (runTargetTemperature < 100) {
lcd.print(" ");
}
}
lcd.print(runTargetTemperature);
// Display time
// Start the clock for "wait" mode
if(runCurrentTemperature == runTargetTemperature && clockStart == false) {
clockStart = true;
runStartTime = now;
}
int displayTime = 0;
if(clockStart) {
displayTime = runTargetTime - ((now - runStartTime) / 1000);
if(displayTime <= 0) {
displayTime = 0;
clockEnd = true;
break;
}
}
else {
displayTime = runTargetTime;
}
int minutes = displayTime/60;
int seconds = displayTime-minutes*60;
lcd.setCursor (10,1);
//lcd.print(" ");
if (minutes < 10) {
lcd.print(" 0");
}
else {
if (minutes < 100) {
lcd.print(" ");
}
}
lcd.print(minutes);
lcd.print(":");
if(seconds<10) {
lcd.print("0");
}
lcd.print(seconds);
}
}
}
void runError() {
if(error != no_error) {
if (error == catastrofic_failure_sensor_temperature)
{
Serial.println("[Error] catastrofic_failure_sensor_temperature!");
lcdPrint("ERROR", "A catastrofic failure was detected on the temperature sensor!");
/*
if (!isnan(dht.readTemperature())) { // Check if any reads failed and exit early (to try again).
error = no_error;
return;
}
*/
}
}
else {
state = state_welcome;
}
}
void lcdPrint(String title, String message) {
int messageLength = message.length();
lcd.clear();
// print title
lcd.home();
lcd.print(title);
// print message
if(messageLength <= LCD_X) {
lcd.setCursor(0,LCD_Y-1);
lcd.print(message);
delay(1000);
}
// print scrolling message
else {
String output_message = " ";
output_message += message;
messageLength = output_message.length();
// Adjust the message size for proper printing
if ( messageLength & 1 == 1 ) {
output_message+=" ";
messageLength+=2;
}
// print scrolling message
for (int cursor = 0; cursor < messageLength - LCD_X; cursor+=2) {
lcd.setCursor(0,LCD_Y-1);
lcd.print(output_message.substring(cursor, cursor+16));
delay(500);
}
}
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment