Rel.3

CustomDataStructures.h

@@ -4,6 +4,7 @@
   Released into the public domain.
 */
 #ifndef CustomDataStructures_h
+#define CustomDataStructures_h
 
 enum eRotaryEncoderMode {
 	eRotaryEncoderMode_Menu,
@@ -13,42 +14,65 @@ enum eRotaryEncoderMode {
 };
 
 // menu
+enum eMenuType {
+	eMenuType_Main,
+	eMenuType_BeerProfile,
+	eMenuType_Stage,
+	eMenuType_Malt,
+	eMenuType_Settings
+};
 enum eMainMenuOptions {
+	eMainMenu_NULL,
 	eMainMenu_GO,
-	eMainMenu_Presets,
+	eMainMenu_STOP,
+	eMainMenu_SKIP,
+	eMainMenu_BeerProfile,
+	eMainMenu_Stage,
 	eMainMenu_Malt,
-	eMainMenu_Startpoint,
-	eMainMenu_BetaGlucanase,
-	eMainMenu_Debranching,
-	eMainMenu_Proteolytic,
-	eMainMenu_BetaAmylase,
-	eMainMenu_AlphaAmylase,
-	eMainMenu_Mashout,
-	eMainMenu_Recirculation,
-	eMainMenu_Sparge,
-	eMainMenu_Boil,
 	eMainMenu_Hops,
-	eMainMenu_Cooling,
+	eMainMenu_Clean,
+	eMainMenu_Purge,
 	eMainMenu_Settings,
 	eMainMenu_Back
 };
 
-enum ePresetsMenuOptions {
-	ePresetsMenu_Trigo,
-	ePresetsMenu_IPA,
-	ePresetsMenu_Belga,
-	ePresetsMenu_Red,
-	ePresetsMenu_APA,
-	ePresetsMenu_Back
+enum eStageMenuOptions {
+	eStageMenu_NULL,
+	eStageMenu_Startpoint,
+	eStageMenu_BetaGlucanase,
+	eStageMenu_Debranching,
+	eStageMenu_Proteolytic,
+	eStageMenu_BetaAmylase,
+	eStageMenu_AlphaAmylase,
+	eStageMenu_Mashout,
+	eStageMenu_Recirculation,
+	eStageMenu_Sparge,
+	eStageMenu_Boil,
+	eStageMenu_Cooling,
+	eStageMenu_Back
+};
+
+enum eBeerProfileMenuOptions {
+	eBeerProfileMenu_NULL,
+	eBeerProfileMenu_Basic,
+	eBeerProfileMenu_Trigo,
+	eBeerProfileMenu_IPA,
+	eBeerProfileMenu_Belga,
+	eBeerProfileMenu_Red,
+	eBeerProfileMenu_APA,
+	eBeerProfileMenu_Custom,
+	eBeerProfileMenu_Back
 };
 
 enum eMaltMenuOptions {
+	eMaltMenu_NULL,
 	eMaltMenu_CastleMalting_Chteau_Pilsen_2RS,
 	eMaltMenu_CastleMalting_Wheat_Blanc,
 	eMaltMenu_Back
 };
 
 enum eSettingsMenuOptions {
+	eSettingsMenu_NULL,
 	eSettingsMenu_PT100_Element,
 	eSettingsMenu_PT100_Up,
 	eSettingsMenu_PT100_Down,
@@ -68,7 +92,19 @@ enum eCookingStages {
 	eCookingStage_Sparge,
 	eCookingStage_Boil,
 	eCookingStage_Cooling,
+	eCookingStage_Clean,
+	eCookingStage_Purge,
 	eCookingStage_Done
 };
 
+enum eBeerProfile {
+	eBeerProfile_Basic,
+	eBeerProfile_Trigo,
+	eBeerProfile_IPA,
+	eBeerProfile_Belga,
+	eBeerProfile_Red,
+	eBeerProfile_APA,
+	eBeerProfile_Custom
+};
+
 #endif
\ No newline at end of file

Display.h

+/*
+  Display.h - Display functions header file.
+  Created by João Lino, September 25, 2015.
+  Released into the public domain.
+*/
+
+#ifndef DISPLAY_h
+#define DISPLAY_h
+
+#include <arduino.h>
+
+#include <Wire.h>
+#include <LCD.h>
+#include <LiquidCrystal_I2C.h>
+
+#include "config.h"
+#include "CustomDataStructures.h"
+
+boolean lcdPrint(LiquidCrystal_I2C *lcd, String title, String message);
+
+void xPaintStatusTemplate(LiquidCrystal_I2C *lcd, boolean cooking);
+
+boolean displayStatus(LiquidCrystal_I2C *lcd, boolean cooking, float cookTemperature, float baseTemperature, float upTemperature, float downTemperature, unsigned long clockCounter, boolean repaint);
+
+boolean displayMainMenu(LiquidCrystal_I2C *lcd, eMainMenuOptions position, boolean repaint);
+boolean displayBeerProfileMenu(LiquidCrystal_I2C *lcd, eBeerProfileMenuOptions position, boolean repaint);
+boolean displayStageMenu(LiquidCrystal_I2C *lcd, eStageMenuOptions position, boolean repaint);
+boolean displayMaltMenu(LiquidCrystal_I2C *lcd, eMaltMenuOptions position, boolean repaint);
+boolean displaySettingsMenu(LiquidCrystal_I2C *lcd, eSettingsMenuOptions position, boolean repaint);
+
+#endif
\ No newline at end of file

MaybeUseful.h

+/*
+void termometerCalibration() {
+  float temperaturePumpOFF = 200.0;
+  float temperaturePumpON = 200.0;
+
+#ifdef DEBUG
+  debugPrintFunction("termometerCalibration");
+#endif
+
+  for( int i = 0; i < 300; i++ ) {
+    basePT100.measure();
+    delay(100);
+  }
+
+  temperaturePumpOFF = basePT100.getCurrentTemperature();
+
+
+  analogWrite(PUMP_PIN, PUMP_SPEED_MAX);
+
+  for( int i = 0; i < 300; i++ ) {
+    basePT100.measure();
+    delay(100);
+  }
+
+  temperaturePumpON = basePT100.getCurrentTemperature();
+
+  analogWrite(PUMP_PIN, PUMP_SPEED_STOP);
+
+#ifdef DEBUG
+  debugPrintVar("temperaturePumpOFF", temperaturePumpOFF);
+  debugPrintVar("temperaturePumpON", temperaturePumpON);
+  debugPrintVar("diff", temperaturePumpON - temperaturePumpOFF);
+#endif
+}
+*/
\ No newline at end of file

Melody.cpp

@@ -71,6 +71,18 @@ int supermario_tempo[] = {
   12, 12, 12, 12,
 };
 
+//Underworld short melody
+int underworld_melody_short[] = {
+  NOTE_C4, NOTE_C5, NOTE_A3, NOTE_A4,
+  NOTE_AS3, NOTE_AS4
+};
+
+//Underwolrd short tempo
+int underworld_tempo_short[] = {
+  12, 12, 12, 12,
+  12, 12
+};
+
 //Underworld melody
 int underworld_melody[] = {
   NOTE_C4, NOTE_C5, NOTE_A3, NOTE_A4,
@@ -117,6 +129,16 @@ int underworld_tempo[] = {
   3, 3, 3
 };
 
+int buzz_1_melody[] = {
+  NOTE_E7, NOTE_E7, NOTE_E7, NOTE_E7,
+  0, 0, 0, 0,
+};
+//Mario main them tempo
+int buzz_1_tempo[] = {
+  12, 12, 12, 12,
+  12, 12, 12, 12,
+};
+
 int song = 0;
 
 void buzz(int targetPin, long frequency, long length) {
@@ -139,7 +161,7 @@ void sing(int s, int pin) {
   song = s;
 
   switch(song) {
-  	case 1: {
+  	case MELODY_SUPER_MARIO: {
 		int size = sizeof(supermario_melody) / sizeof(int);
 	    for (int thisNote = 0; thisNote < size; thisNote++) {
 	 
@@ -161,7 +183,7 @@ void sing(int s, int pin) {
 	    }
   		break;
   	}
-  	case 2: {
+  	case MELODY_UNDERWORLD: {
 		int size = sizeof(underworld_melody) / sizeof(int);
 	    for (int thisNote = 0; thisNote < size; thisNote++) {
 	 
@@ -183,7 +205,7 @@ void sing(int s, int pin) {
 	    }
   		break;
   	}
-  	case 3: {
+  	case MELODY_SUPER_MARIO_START: {
 		int size = sizeof(supermario_start_melody) / sizeof(int);
 	    for (int thisNote = 0; thisNote < size; thisNote++) {
 	 
@@ -205,6 +227,50 @@ void sing(int s, int pin) {
 	    }
   		break;
   	}
+    case MELODY_UNDERWORLD_SHORT: {
+    int size = sizeof(underworld_melody_short) / sizeof(int);
+      for (int thisNote = 0; thisNote < size; thisNote++) {
+   
+        // to calculate the note duration, take one second
+        // divided by the note type.
+        //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
+        int noteDuration = 1000 / underworld_tempo_short[thisNote];
+   
+        buzz(pin, underworld_melody_short[thisNote], noteDuration);
+   
+        // to distinguish the notes, set a minimum time between them.
+        // the note's duration + 30% seems to work well:
+        int pauseBetweenNotes = noteDuration * 1.30;
+        delay(pauseBetweenNotes);
+   
+        // stop the tone playing:
+        buzz(pin, 0, noteDuration);
+   
+      }
+      break;
+    }
+    case BUZZ_1: {
+    int size = sizeof(buzz_1_melody) / sizeof(int);
+      for (int thisNote = 0; thisNote < size; thisNote++) {
+   
+        // to calculate the note duration, take one second
+        // divided by the note type.
+        //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
+        int noteDuration = 1000 / buzz_1_tempo[thisNote];
+   
+        buzz(pin, buzz_1_melody[thisNote], noteDuration);
+   
+        // to distinguish the notes, set a minimum time between them.
+        // the note's duration + 30% seems to work well:
+        int pauseBetweenNotes = noteDuration * 1.30;
+        delay(pauseBetweenNotes);
+   
+        // stop the tone playing:
+        buzz(pin, 0, noteDuration);
+   
+      }
+      break;
+    }
 
   }
 }
\ No newline at end of file

Melody.h

@@ -106,6 +106,8 @@
 #define MELODY_SUPER_MARIO  1
 #define MELODY_UNDERWORLD 2
 #define MELODY_SUPER_MARIO_START  3
+#define MELODY_UNDERWORLD_SHORT 4
+#define BUZZ_1 5
 
 
 //  melody[] is an array of notes, accompanied by beats[],

config.h

+/*
+  debug.h - Debug functions.
+  Created by João Lino, September 25, 2015.
+  Released into the public domain.
+*/
+
+#ifndef CONFIG_h
+#define CONFIG_h
+
+// ######################### SETTINGS #########################
+#define SETTING_CLEANING_TIME					  1200 //1200
+#define SETTING_CLEANING_TEMPERATURE			  45 //45
+
+// ++++++++++++++++++++++++ Heating Element Relay ++++++++++++++++++++++++
+#define HEATING_ELEMENT_DEFAULT_WINDOW_SIZE       1000
+#define HEATING_ELEMENT_OUTPUT_PIN                24
+#define HEATING_ELEMENT_MAX_HEAT_PWM_INTEGER      5
+#define HEATING_ELEMENT_MAX_HEAT_PWM_FLOAT        5.0
+#define HEATING_ELEMENT_MAX_WATTAGE               3000.0          // Minimum = 2000.0
+#define HEATING_ELEMENT_AC_FREQUENCY_HZ           50.0
+
+// ++++++++++++++++++++++++ Temperature ++++++++++++++++++++++++
+#define PT100_BASE_INPUT_PIN                      A4
+#define PT100_BASE_OUTPUT_PIN                     32
+#define PT100_BASE_INPUT_R_PIN                    A7
+#define PT100_BASE_OUTPUT_R_PIN                   7
+#define PT100_BASE_TIME_BETWEEN_READINGS          1
+#define PT100_UP_INPUT_PIN                        A5
+#define PT100_UP_OUTPUT_PIN                       30
+#define PT100_UP_INPUT_R_PIN                      A8
+#define PT100_UP_OUTPUT_R_PIN                     9
+#define PT100_UP_TIME_BETWEEN_READINGS            1
+#define PT100_DOWN_INPUT_PIN                      A6
+#define PT100_DOWN_OUTPUT_PIN                     31
+#define PT100_DOWN_INPUT_R_PIN                    A9
+#define PT100_DOWN_OUTPUT_R_PIN                   8
+#define PT100_DOWN_TIME_BETWEEN_READINGS          1
+
+#define PT100_BASE_DEFAULT_ADC_VMAX               1.1
+#define PT100_BASE_DEFAULT_VS                     5.0
+#define PT100_BASE_DEFAULT_R1_RESISTENCE          605.2
+#define PT100_BASE_DEFAULT_R2_RESISTENCE          605.2
+#define PT100_UP_DEFAULT_ADC_VMAX                 1.1
+#define PT100_UP_DEFAULT_VS                       5.0
+#define PT100_UP_DEFAULT_R1_RESISTENCE            630.0 //620.0
+#define PT100_UP_DEFAULT_R2_RESISTENCE            610.0
+#define PT100_DOWN_DEFAULT_ADC_VMAX               1.1
+#define PT100_DOWN_DEFAULT_VS                     5.0
+#define PT100_DOWN_DEFAULT_R1_RESISTENCE          616.0
+#define PT100_DOWN_DEFAULT_R2_RESISTENCE          611.0
+
+// ++++++++++++++++++++++++ Mixer ++++++++++++++++++++++++
+//#define MIXER_PIN     12
+//#define MIXER_MAX_POSITION   255
+
+// ++++++++++++++++++++++++ Pump ++++++++++++++++++++++++
+#define PIEZO_PIN                                 25
+
+// ++++++++++++++++++++++++ Pump ++++++++++++++++++++++++
+#define PUMP_PIN                                  6
+#define PUMP_TEMPERATURE_MAX_OPERATION            90
+#define PUMP_SPEED_STOP                           0
+#define PUMP_SPEED_SLOW                           64
+#define PUMP_SPEED_AVERAGE                        128
+#define PUMP_SPEED_FAST                           192
+#define PUMP_SPEED_MAX                            255
+
+// ++++++++++++++++++++++++ Rotary Encoder ++++++++++++++++++++++++
+#define ROTARY_ENCODER_INTERRUPT_NUMBER           1    // On Mega2560 boards, interrupt 1 is on pin 3
+#define ROTARY_ENCODER_CLK_PIN                    3    // Used for generating interrupts using CLK signal
+#define ROTARY_ENCODER_DT_PIN                     22    // Used for reading DT signal
+#define ROTARY_ENCODER_SW_PIN                     23    // Used for the push button switch
+#define ROTARY_ENCODER_DEBOUNCE_TIME              50 //20    // Number of miliseconds to ignore new signals a signal is received
+
+// ++++++++++++++++++++++++ State Machine ++++++++++++++++++++++++
+#define SETTING_WELCOME_TIMEOUT                   100
+#define SETTING_MAX_INACTIVITY_TIME               3000
+#define MENU_SIZE_MAIN_MENU                       12
+#define MENU_SIZE_PROFILES_MENU                   9
+#define MENU_SIZE_STAGE_MENU                      13
+#define MENU_SIZE_MALT_MENU                    	  4
+#define MENU_SIZE_SETTINGS_MENU                   5
+#define SETTING_SERIAL_MONITOR_BAUD_RATE          9600
+#define SETTING_SERIAL_MONITOR_WELCOME_MESSAGE    "Let's start Brewing!"
+
+// ######################### LIBRARIES #########################
+// ++++++++++++++++++++++++ LiquidCrystal_I2C ++++++++++++++++++++++++
+#define LCD_I2C_ADDR                              0x27    // <<----- Add your address here.  Find it from I2C Scanner
+#define LCD_HORIZONTAL_RESOLUTION                 16
+#define LCD_VERTICAL_RESOLUTION                   2
+#define LCD_BACKLIGHT_PIN                         3
+#define LCD_EN_PIN                                2
+#define LCD_RW_PIN                                1
+#define LCD_RS_PIN                                0
+#define LCD_D4_PIN                                4
+#define LCD_D5_PIN                                5
+#define LCD_D6_PIN                                6
+#define LCD_D7_PIN                                7
+
+#endif
\ No newline at end of file

debug.h

+/*
+  debug.h - Debug functions.
+  Created by João Lino, September 25, 2015.
+  Released into the public domain.
+*/
+
+#ifndef DEBUG_h
+#define DEBUB_h
+
+// ######################### TEMPLATES #########################
+template <class T> void debugPrintVar( char *name, const T& value );
+template <class T> void debugPrintVar( char *name, const T& value ) {
+  Serial.print("[");
+  Serial.print(name);
+  Serial.print(":");
+  Serial.print(value);
+  Serial.println("]");
+}
+void debugPrintFunction( char *name ) {
+  Serial.print("++++++++++++++++++++++++ ");
+  Serial.print(name);
+  Serial.println("++++++++++++++++++++++++");
+}
+
+#endif
\ No newline at end of file